George King

Workover Equipment & Methods

16:37 Hours
This professional training course, titled ‘Workover Equipment & Methods,’ offers a deep dive into the design and operational procedures for well workovers and repairs, consolidating over 40 years of practical industry experience. The course thoroughly explores well workover equipment and techniques with a focus on problem prevention, operational safety, and best practices. Key topics include conformance, acidizing, erosions, corrosion, and innovative repair methods like expandable technology. Delivered by experts, this training enhances the knowledge and skills of both new and seasoned energy professionals. Participants benefit from comprehensive lessons that blend real-world wisdom with technical expertise, accelerating their practical understanding beyond typical textbook learning.

Who Should Take This Course
• Experienced production engineers
• New energy industry professionals
• Reservoir and completions engineers
• Completions and wellsite operation staff

What You Will Learn
• Proper design of well workover equipment
• Application of expandable repair technologies
• Techniques for wireline operations and tool use
• Safe and effective workover operating procedures

Why This Course Works
• Increase safety and reduce operational risks
• Prevent problems through best practice methods
• Gain practical knowledge from industry experts
• Improve repair efficiency and well productivity

1.01 Repairs with Expandables (19 min.)  

2.01 Wireline Operations – Part 1 (20 min.)
2.02 Wireline Operations – Part 2 (26 min.)
2.03 Wireline Operations – Part 3 (24 min.)
2.04 Wireline Operations – Part 4 (26 min.) 

3.01 Plugs and Profiles (26 min.)

4.01 Coiled Tubing for Workovers – Part 1 (20 min.)
4.02 Coiled Tubing for Workovers – Part 2 (20 min.) 

5.01 Hydraulic Workovers – Snubbing (16 min.) 

6.01 Workover Fluids – Part 1 (17 min.)
6.02 Workover Fluids – Part 2 (14 min.) 

7.01 Pickling Procedures – Part 1 (14 min.)
7.02 Pickling Procedures – Part 2 (14 min.) 

8.01 Acidizing to Remove or Bypass Formation Damage – Part 1 (23 min.)
8.02 Acidizing to Remove or Bypass Formation Damage – Part 2 (21 min.)
8.03 Acidizing to Remove or Bypass Formation Damage – Part 3 (24 min.)
8.04 Acidizing to Remove or Bypass Formation Damage – Part 4 (23 min.) 

9.01 Refracturing – Part 1 (20 min.)
9.02 Refracturing – Part 2 (20 min.) 

10.01 Deviated Well Interventions (23 min.) 

11.01 Alternate Stimulation Methods – Part 1 (14 min.)
11.02 Alternate Stimulation Methods – Part 2 (12 min.) 

12.01 Water Influx & Conformance Control – Part 1 (19 min.)
12.02 Water Influx & Conformance Control – Part 2 (21 min.)

13.01 Coning Control (12 min.) 

14.01 Downhole Chokes & Inflow Control Devices (13 min.)

15.01 Pipe Cutoff Methods Downhole (24 min.) 

16.01 Wireline Cased Hole Fishing – Part 1 (21 min.)
16.02 Wireline Cased Hole Fishing – Part 2 (21 min.) 

17.01 Perforating and Reperforating – Part 1 (20 min.)
17.02 Perforating and Reperforating – Part 2 (18 min.)
17.03 Perforating and Reperforating – Part 3 (18 min.) 

18.01 NORM – Naturally Occurring Radioactivity (25 min.) 

19.01 Wellhead Isolation (13 min.) 

20.02 Wellbore Cleanout and Debris Removal – Part 2 (19 min.)
20.03 Wellbore Cleanout and Debris Removal – Part 3 (15 min.) 

21.01 Wellhead Problems and Repairs (17 min.)

22.01 Stuck Point and Backoff (11 min.) 

23.01 Filtration – Part 1 (21 min.)
23.02 Filtration – Part 2 (17 min.) 

24.01 Sand Control Failure Causes and Repairs – Part 1 (19 min.)
24.02 Sand Control Failure Causes and Repairs – Part 2 (19 min.)
24.03 Sand Control Failure Causes and Repairs – Part 3 (23 min.)
24.04 Sand Control Failure Causes and Repairs – Part 4 (22 min.) 

Access All Saga Wisdom Training Content

Already a member? Sign in.