1.01 Introduction (1 min.) 
1.02 Course Overview (10 min.)
1.03 What is Petrophysics (7 min.)
1.04 Course Outline (6 min.)
1.05 Well Logging (13 min.)
1.06 Tool Theory (11 min.)
1.07 Spontaneous Potential Logs (9 min.)
1.08 Neutron Logs (17 min.)
1.09 Resistivity Logs (10 min.)
1.10 Sonic Logs (5 min.)
1.11 Photoelectric Logs (7 min.)
1.12 Caliper Logs (5 min.)
1.13 Other Logs (7 min.)

2.01 Quicklook Log Analysis Intro (7 min.)
2.02 Quicklook Log Analysis – Example 1 (9 min.)
2.03 Quicklook Log Analysis – Example 2 (12 min.)
2.04 Quicklook Log Analysis – Example 4 (14 min.)
2.05 Quicklook Log Analysis – Example 5 (23 min.)
2.06 Quicklook Log Analysis Wrap Up (13 min.)

3.01 Petrophysical Workflow Intro (2 min.)
3.02 Deterministic vs Probabilistic Workflows (18 min.)
3.03 Data Prep and Conditioning (24 min.)
3.04 Bad Hole Identification (29 min.)
3.05 Clay Volume (17 min.)
3.06 Clay Volume – Gamma Ray Methods (17 min.)
3.07 Clay Volume – Calibration (12 min.)
3.08 Total Organic Carbon – Passey Overlay Methods (21 min.)
3.09 Total Organic Carbon – Schmoker Method (9 min.)
3.10 Total Organic Carbon – Faust Method (7 min.)
3.11 Total Organic Carbon – Methods Comparison and Calibration (17 min.)
3.12 Porosity Evaluation Overview (8 min.)
3.13 Density Porosity Method (9 min.)
3.14 Neutron-Density Porosity Method (7 min.)
3.15 Sonic Porosity Methods (7 min.)
3.16 Density Porosity Revisited (8 min.)
3.17 Grain Density Approximation Method (20 min.)
3.18 Total to Effective Porosity Corrections (15 min.)
3.19 Porosity – Dealing with Bad Hole (16 min.)
3.20 Porosity – Calibration (10 min.)
3.21 Saturation Overview (9 min.)
3.22 Saturation – Archie’s PhiE-PhiT Methods (13 min.)
3.23 Saturation – The Pickett Plot (15 min.)
3.24 Saturation – Temperature, Salinity and Rw (8 min.)
3.25 Saturation – Simandoux Method (10 min.)
3.26 Saturation – Dual Water Method (8 min.)
3.27 Saturation – Calibration (17 min.)
3.28 Cutoffs Analysis (9 min.)
3.29 Cutoffs Analysis – In Practice (26 min.)

4.01 Mineral Inversion Based Porosity (14 min.)
4.02 How Inversion Works – Theory (13 min.)
4.03 How Inversion Works – Theory Continued (13 min.)
4.04 How Inversion Works – Adding Constraints (15 min.)
4.05 Inversion – Using the Results (8 min.)
4.06 Inversion – In Practice (16 min.)
4.07 Inversion – Component Properties (8 min.)
4.08 Inversion – Curve Availability and Usage (8 min.)
4.09 Inversion – Adding Uncertainty and Constraints (4 min.)
4.10 Inversion – Analyzing Results (6 min.)
4.11 Inversion – Workflow Review (11 min.)

5.01 Lab Measurements – Introduction (13 min.)
5.02 Special Core Analysis (15 min.)
5.03 XRD & XRF Measurements (15 min.)
5.04 General Recommendations (15 min.)
5.05 Integrating Petrophysics – Mapping (29 min.)
5.06 Course Summary (15 min.)

6.01 Danomics – Hands-On Introduction (4 min.)
6.02 Danomics – Getting Started (7 min.)
6.03 Danomics – Create Project and Data Loading (9 min.)
6.04 Danomics – Data Prep and Conditioning (9 min.)
6.05 Danomics – Establishing a Stratographic Column (7 min.)
6.06 Danomics – Normalizing the Data (15 min.)
6.07 Danomics – Bad Hole ID and Repair (24 min.)
6.08 Danomics – Clay Volume (35 min.)
6.09 Danomics – TOC Analysis (24 min.)
6.10 Danomics – Porosity Interpretation (16 min.)
6.11 Danomics – Mineral Inversion (26 min.)
6.12 Danomics – Water Saturation Interpretation (18 min.)
6.13 Danomics – Cutoffs Analysis (21 min.)
6.14 Danomics – Course Wrap-up (8 min.)