1.01 Intro to Tight Rock Core Analysis (19 min.)
1.02 Workflows (14 min.)
1.03 Core Preparation – Part 1 (25 min.)
1.04 Core Preparation – Part 2 (12 min.)
1.05 Porosity – Part 1 (6 min.)
1.06 Porosity – Part 2 (Pore Types) (15 min.)
1.07 Porosity – Part 3 (Measurement) (16 min.)
1.08 Porosity – Part 4 (Grain Density/Bulk Volume) (18 min.)
1.09 Porosity – Part 5 (GRI Method) (14 min.)
1.10 Pore Size Distribution – Part 1 (8 min.)
1.11 Pore Size Distribution – Part 2 (LPA) (20 min.)
1.12 Pore Size Distribution – Part 3 (SANS/USANS) (11 min.)
1.13 Permeability – Part 1 (16 min.)
1.14 Permeability – Part 2 (Klinkenberg Correction) (13 min.)
1.15 Permeability – Part 3 (Standards for Tight Rocks) (7 min.)
1.16 Permeability – Part 4 (Measurement) (11 min.)
1.17 Permeability – Part 5 (USS Perm. – Crushed-Rock) (16 min.)
1.18 Permeability – Part 6 (Drill Cutting) (8 min.)
1.19 Permeability – Part 7 (Drill Cutting – 2) (17 min.)
1.20 Permeability – Part 8 (Slabbed Core) (20 min.)
1.21 Permeability – Part 9 (Pulse-Decay) (14 min.)
1.22 Permeability – Part 10 (Method Comparison) (16 min.)
1.23 Permeability – Part 11 (Pore Throat Size) (6 min.)
1.24 Permeability – Part 12 (Fracture Permeability) (24 min.)
1.25 Stress Dependence – Part 1 (18 min.)
1.26 Stress Dependence – Part 2 (Biot Constant) (6 min.)
1.27 Stress Dependence – Part 3 (Facture Compressibility (10 min.)
1.28 Permeability & Stress-Sensitivity Summary (12 min.)
1.29 Mercury Intrusion Capillary Pressure (MICP) – Part 1 (23 min.)
1.30 MICP – Part 2 (NUTECH Study) (18 min.)
1.31 MICP – Part 3 (Characterizing Hydraulic Rock Types & Flow Units) (9 min.)
2.01 Special Core Analysis Overview (7 min.)
2.02 Wettability – Part 1 (18 min.)
2.03 Wettability – Part 2 (Video Example) (13 min.)
2.04 Wettability – Part 3 (Effect of Scale) (14 min.)
2.05 Liquid Permeability – Part 1 (24 min.)
2.06 Liquid Permeability – Part 2 (Gas vs. Liquid) (13 min.)
2.07 Relative Permeability – Part 1 (12 min.)
2.08 Relative Permeability – Part 2 (Dacy Method) (13 min.)
2.09 Relative Permeability – Part 3 (Modified Dacy Method) (18 min.)
2.10 Relative Permeability – Part 4 (Crushed Rock Methods) (19 min.)
2.11 Imbibition (16 min.)
2.12 Core-Flooding (25 min.)
2.13 Additional Huff-n-Puff Studies – Part 1 (23 min.)
2.14 Additional Huff-n-Puff Studies – Part 2 (Impact of Induced Fractures) (21 min.)
2.15 Additional Huff-n-Puff Studies – Part 3 (Effect of Water Saturation) (26 min.)
2.16 Mechanical Properties – Part 1 (7 min.)
2.17 Mechanical Properties – Part 2 (Microhardness) (21 min.)
2.18 Elastic/Mechanical Properties – Part 1 (Sonic Velocity) (12 min.)
2.19 Elastic/Mechanical Properties – Part 2 (Montney/Duvernay Comparison) (20 min.)
2.20 Elastic/Mechanical Properties – Part 3 (Ultrasonic) (23 min.)
2.21 Mechanical Properties – Part 3 (Static Measurements) (6 min.)
2.22 Mechanical Properties – Part 4 (Indirectly from Cuttings) (10 min.)
2.23 Poroelasticity & Non-Darcy Flow (31 min.)
3.01 Case Study Introduction (2 min.)
3.02 Case Study #1 – Part 1 (27 min.)
3.03 Case Study #1 – Part 2 (26 min.)
3.04 Case Study #2 – Part 1 (20 min.)
3.05 Case Study #2 – Part 2 (14 min.)
3.06 Case Study #3 – Part 1 (13 min.)
3.07 Case Study #3 – Part 2 (21 min.)
3.08 Case Study #3 – Part 3 (6 min.)